All Motors, Tension Sensors Adj - Sony GY-8240UWD Maintenance Manual

5-9-5. All Motors, Tension Sensors Adj

Function: Automatically executes the servo adjustment. The servo check is executed in the following
order;
S reel motor FG automatic adjustment → T reel motor FG automatic adjustment → capstan
motor FG automatic adjustment → S tension sensor amplifier automatic adjustment → T
tension sensor amplifier automatic adjustment → S reel terminal voltage check → T reel
terminal voltage check → drum jitter check
Operation: Enter "2"" after the prompt "ADJ=>" at the ADJ mode menu.
This check will take about 8 minutes. To cancel the adjustment, press the Emergency Eject
button. To execute the check after pressing the Emergency Eject button, turn off and then on
the power first.
ADJ=> 2"
All motors, tension sensors adj...
Adjusting...
OK
When the adjustment ends normally, "OK" will be displayed.
If it ends in an error, a message corresponding to the error will be displayed.
For details on messages displayed, refer to "5-9-9. ADJ Mode Error Message".
If the adjustment ends normally, the adjustment value will be automatically saved.
GY-8240UWD
GY-8240FC
5-9. ADJ Mode
5-115