Table of Contents
Advertisement
3-2.
SYSTEM
CONTROL
CHECK
System
Control
Check
Setting:
REEL SIZE switch:
10%
TAPE SPEED switch:
19 cm
TIMER switch:
OFF
MONITOR
switch:
TAPE
PB LEVEL
control:
center click
REC MONITOR
MUTE
switch:
OFF
INPUT SELECT
switch:
LINE
(AEP, UK model)
REC MODE
switches:
released positions
Put the 10%-inch blank tapes on the set.
Checking:
1.
Turn POWER
switch ON.
The VU meter lamps
should light up.
Depress REC MODE switches.
The L-side lamp
should
light up when
the L-side REC
MODE
switch is depressed, and the R-side lamp should
light up when the R-side REC MODE
switch is
depressed.
And the record button lamp should
put on and off repeatedly.
Depress
the pause button.
The pause button
lamp should light up.
Depress the record and forward buttons simul-
taneously.
The
record
button
lamp
should
turn from flickering to ON.
At the same time,
the forward button lamp should light up.
Press the pause button.
The pause button lamp
should
turn
off and the pinch roller should
press the capstan and become in forward record
mode.
Depress the fast forward button. The set should
become in the fast forward mode,
In this mode,
the record button lamp flickers, forward button
lamp
turns
off and
the fast forward
button
lamp turns on.
Depress
the
rewind
button.
The
set should
become in the rewind mode.
In this mode, the
fast forward button lamp should turn off and
rewind button lamp turns on.
Depress the forward button. The rewind button
lamp should turn off and forward button lamp
turns
on.
The
tape should
once
completely
stop traveling, and then become in the forward
mode.
11.
12.
13.
| TC-766-2
The set should become in the stop mode only
when both the tension arm microswitches turn
off.
The
set should not become
in the stop
mode
when
one
of the
tension
arm
micro-
switches turns off.
Turn TIMER
switch ON.
Turn POWER switch
OFF
once, and two to three second later turn
POWER
switch
ON.
Now
the
set
should
become
in
the
forward
record
mode
auto-
matically.
With REC MODE
switches released (i.e., in the
playback
positions),
perform
the
same
pro-
cedure
as shown
in step 10.
The set should
become in forward mode automatically.
Place the set in the forward record and simul-
taneous monitoring
mode.
Turn REC
MONI-
TOR
MUTE
switch
on
the
rear
panel
ON.
Now
the
signal
should
not come
out
from
LINE OUT jacks.
Rewind
the recorded
portion of the tape and
place the set in the forward
mode.
Now
the
signal should come out from LINE OUT jacks.
Turn REC MONITOR
MUTE
switch OFF.
Depress the forward and pause buttons.
Move
the recorded
portion
of the
tape
back
and
forth.
Sound
signal
should
come
out from
LINE OUT jacks.
Advertisement
Table of Contents
