Sony GY-8240UWD Maintenance Manual page 321

Reading the IF CPU LOG 4
(Example)
<<IF Initialize log>>
CNT--STAT--ON--CMD-------------------------------------------------------------
0 RECV 075 Time out!
1 RECV 075 Time out!
2 SEND 075 020401260101d3
3 RECV 075 04
4 SEND 075 02140122ffff00000000000000000000000000000000cb
5 RECV 075 04
6 SEND 075 0205012200084090
7 RECV 075 04
8 SEND 075 020401260101d3
9 RECV 075 04
10 SEND 075 02050127ffffffd6
11 RECV 075 04
12 SEND 075 02150121c000a0496e697469616c697a696e672e2e2e2ec6
13 RECV 075 04
14 SEND 075 02150121fc0aa020202020202020205b20312f31325d2068
15 RECV 075 04
(Q:quit/A:all/T:top/B:bottom/P:previous/N:next)=>
Description of Display
CNT: LOG count (From 0 to 1021.)
STAT: Transmission/reception status to display (SEND = Transmitted to display, RECV = Received
from display)
ON: Power ON count
CMD: Command packet transmitted and received
Log Display Operation
When logs are displayed, the following message will be displayed at the very bottom.
This is the log display operation command. By entering the characters specified for the desired operation,
the log display can be modified.
(Q:quit/A:all/T:top/B:bottom/P:previous/N:next)=>
Q: quit (Exits this log display)
A: All (Displays all pages of the log currently displayed)
T: top (Displays the first page of the log currently displayed)
B: Bottom (Displays the last page of the log currently displayed)
P: previous (Displays the previous page of the log currently displayed)
N: next (Displays the next page of the log currently displayed)
For example, as the log displays 16 lines in one page, to view the log of the next page, enter "N".
GY-8240UWD
GY-8240FC
5-6. LOG Mode
5-105