Default Setup Information Set - Sony GY-8240UWD Maintenance Manual

5-10. SETUP Mode

5-10-5. Default Setup Information Set

Function: Sets the default values of the setup data.
Operation: Enter "3"".
The value in [ ] shows the currently set value while the default value to be set is shown after "=>".
At the end, a confirmation message will be displayed. To set the default value, enter "y"". To cancel the
setting, enter "n"".
For GY-8240UWD
SETUP=>3"
SCSI ID (0-15)
IP address (0-255 each)
Subnet mask (0-255 each)
Gateway address (0-255 each)
Unload mode (0:NORMAL/1:FAST)
Auto load mode (0:OFF/1:ON)
Fast unload location (0:NORMAL/1:TOP) [0]
Auto format mode (0:OFF/1:ON)
On the halfway (0:OFF/1:ON)
Compression mode (0:SCSI/1:ON/2:OFF)
File mark flush mode(0:OFF/1:ON)
Recover TYPE (0-2)
Fast read mode (0:OFF/1:ON)
Are you sure?(Y:yes/N:no)=> y
Default Values of Each Item
. SCSI ID:
5
. IP address:
127.0.0.1
. Subnet mask:
255.255.255.0
. Gateway address:
0.0.0.0
. Unload mode:
FAST
. Auto load mode:
ON
. Fast unload location:
NORMAL
. Auto format mode:
OFF
. On the halfway: OFF
. Compression mode:
SCSI
. File mark flush mode: OFF
. Recover TYPE: 1
. Fast read mode:
OFF
5-126
[5]
[127. 0. 0. 1] => 127.0.0.1
[255.255.255. 0] => 255.255.255.0
[ 0. 0. 0. 0] => 0.0.0.0
[1]
[1]
[1]
[0]
[1]
[0]
[1]
[0]
Default Setup Information Set Execution Screen
=> 5
=> 1
=> 1
=> 0
=> 0
=> 0
=> 0
=> 0
=> 1
=> 0
GY-8240UWD
GY-8240FC