5-8. SERVICE Mode
This mode is used for setting/displaying data for servicing.
Enter "SERV"" from the maintenance terminal. The message "SERV=>" will be displayed as the
prompt. Enter the command number (or command) after this prompt and press ". The command will be
executed. Entering "quit"" terminates the SERVICE mode
n
. The SERVICE mode cannot be activated from other mode. To activate the SERVICE mode, terminate
the current mode first.
. Settings of this SERVICE mode are effective after the GY-8240 is restarted. After setting this mode, be
sure to turn off and then on the power.
serv"
+===[ Service menu ]======================================================+
|
| quit: Quit Tool
|
| 1 : Service information set
| 3 : Default service information set
|
+======================================[ Copyright(c) 2000 Sony Corp. ]===+
SERV=>
5-8-1. Quit Tool
Function: Exits the SERVICE mode and returns to the maintenance mode.
Operation: Enter "quit"".
5-8-2. Display Help Menu
Function: Displays the SERVICE mode menu.
Operation: Enter "help"".
SERV=>help"
+===[ Service menu ]======================================================+
|
| quit: Quit Tool
|
| 1 : Service information set
| 3 : Default service information set
|
+======================================[ Copyright(c) 2000 Sony Corp. ]===+
SERV=>
GY-8240UWD
GY-8240FC
help: Display Help Menu
2 : Service information display |
SERVICE Mode Execution Screen
help: Display Help Menu
2 : Servvice information display |
Display Help Menu Execution Screen
5-8. SERVICE Mode
|
|
|
|
|
|
|
|
|
|
5-107