3-24. Cassette Compartment Motor Replacement
Outline
Replacement
1. Disconnecting the Harness (CN935/CL-29 Board)
2. Removing the Warm
3. Removing the Cassette Compartment Motor
4. Removing the Motor Joint
5. Removing the Spacer and Disconnecting the Harness
6. Harness Soldering
7. Attaching the Motor Joint
8. Attaching the Spacer and Worm
9. Attaching the Cassette Compartment Motor
10. Applying the Grease
11. Connecting the Harness (CN935/CL-29 Board)
Adjustment after Replacement
12. Checking the Cassette Compartment Motor Operation (Refer to Section 5-4-13.)
(CH03: Cassette Compartment Motor Check.)
Preparation
1. Turn off the power and remove the power cord.
2. Remove the top panel. (Refer to Section 1-1.)
3. Remove the plate MD assembly. (Refer to Section 1-2.)
4. Remove the cassette compartment assembly. (Refer to Section 1-2.)
Tools
. L wrench (Across flat has 0.89 mm): 7-700-736-06
. Grease (SGL-601):
. Cleaning cloth:
. Cleaning fluid:
. Calipers (or the equivalent)
GY-8240UWD
GY-8240FC
7-651-000-10
3-184-527-01
9-919-573-01
3-24. Cassette Compartment Motor Replacement
3-89