Update With Dtf-2 Cassette - Sony GY-8240UWD Maintenance Manual

1-15-2. Update with DTF-2 Cassette

Updating
1. Open the door of the front panel and press the SELECT button.
The LCD display turns as below, then enter the menu selection display.
Select menu
CUSTOM menu
2. Select the UPDATE menu by using "9" and "0" button, then press the ENTER button.
The LCD display turns as below.
Select menu
UPDATE menu
3. Select "From Tape" in UPDATE menu:1, then press the ENTER button.
The LCD display turns as below.
UPDATE menu:1
Update OK?
4. Press again the ENTER button for update operation.
The LCD display turns as below.
Insert
FW-UPDATE Tape
5. Insert the dedicated cassette in this unit.
The firmware is automatically updated in the following order.
DSP CPU → SV1 CPU → SV2 CPU → SYS CPU → IF CPU → FMT CPU
After the update is all completed, the cassette is ejected.
Confirming
6. Select the ROM menu by using "9" and "0" button and press the ENTER button.
The LCD display turns as below.
Select menu
ROM menu
7. Select "FW revision" in the ROM menu:1, then press the ENTER button.
Firmware revision is displayed on the LCD.
Check that the firmware is updated to the corresponding revision.
FW revision
X.XX
8. Press the ESC button.
ROM menu:1
Fw revision
9. Select "ROM Version" in the Rom menu:2 by using "9" and "0" button, then press the ENTER
button.
The ROM version of the CPU is displayed on the LCD.
Check the ROM version of every CPU using the "9" and "0" button.
ROM version
FMT [XX.XX.XX]
GY-8240UWD
GY-8240FC
UPDATE menu:1
From Tape
ROM menu:1
Fw revision
ROM menu:2
ROM version
1-15. Update of the Firmware
1-61