Sony GY-8240UWD Maintenance Manual page 356

5-13. Troubleshooting
4. Acquire the logs. (Refer to "5-6. LOG mode".)
a. Set the PC/workstation to the LOG acquisition mode. (Refer to "5-6. LOG mode".)
b. Refer to the capture on the text to be transferred, and select the capture file.
(For Tera Term Pro)
File: Log: (Specify file name) Example:
c. When the command "adsp"" is entered on the PC, the logs of all CPUs will automatically be
acquired.
[Logs are displayed for more than ten minutes]
59 00001025 Maintenance Monitor Used 0009C
Command[9] fLoad[1] fActMode[0] Rsv[0]
60 00001200 Maintenance Monitor Used 0009C
Command[4] fLoad[1] fActMode[0] Rsv[0]
61 00015576 Maintenance Monitor Used 0009D
Command[9] fLoad[1] fActMode[0] Rsv[0]
62 00015786 Maintenance Monitor Used 0009D
Command[2] fLoad[312E3030] fActMode[41300104] Rsv[0]
63 0001867D Maintenance Monitor Used 0009D
Command[9] fLoad[1] fActMode[0] Rsv[0]
64 00018AEE Maintenance Monitor Used 0009D
Command[2] fLoad[312E3030] fActMode[41300104] Rsv[0]
>>>>>>>>>>>>>>>>>>>>[Serial LOG ]<<<<<<<<<<<<<<<<<<
d. After logs have been updated, entering "quit"" following the prompt "LOG=>" ends the LOG
acquisition mode of the PC/workstation.
For the Windows95 hyper terminal, after the quit command is executed, data transfer and text
capture are stopped.
5-140
000825-012345-1123. log
Date S/N Error
of set code
GY-8240UWD
GY-8240FC