Tape Cleaner Replacement - Sony GY-8240UWD Maintenance Manual

3-18. Tape Cleaner Replacement

3-18. Tape Cleaner Replacement
n
Do not touch the tape cleaner with bare hands.
The tape cleaner has a sharp edge, which may cause a hand cut.
Outline
Replacement
1. Removing the Tape Cleaner
2. Installing the Tape Cleaner
Note
Adjustment after the tape cleaner replacement is not required.
Tools
. Torque screwdriver (6 kg.cm)(JB-5251):
J-6252-510-A
. Torque screwdriver's bit (+2 mm, l = 75 mm): J-6323-420-A
Preparation
1. Turn the power off and remove the power cord.
2. Remove the top panel. (Refer to Section 1-1.)
3. Remove the plate MD. (Refer to Section 1-2.)
4. Remove the cassette compartment. (Refer to Section 1-2.)
Removal
1. Removing the Tape Cleaner
PS2 x 6
Remove the screw, then remove the tape cleaner
Tape cleaner
from the S plate assembly.
S plate assembly
Installation
2. Installing the Tape Cleaner
Tighten the screw while moving a new tape
cleaner clockwise.
_2
Tightening torque: 19.6 x 10 N.m {2 kgf.cm}
Remove/Install the Tape Cleaner
3-63
GY-8240UWD
GY-8240FC