Sony GY-8240UWD Maintenance Manual page 93

2. S Cassette Position
S cassette position means that the reel tables are in the position of S cassette tape.
There are two methods of putting the reel tables into the S cassette position from the
L cassette position with the cassette compartment taken off the unit.
Method 1: With the power turned on, press into the L cassette REC INHIBIT
sensor about three seconds.
Method 2: 1. Remove the SE-606 board. (Refer to Section 3-14.)
2. Turn fully the gear of reel shift motor in the arrow D direction.
S reel table
GY-8240UWD
GY-8240FC
T reel table
Gear
D
S Cassette Position
3-1. General Information for Parts Replacement
L cassette
REC INHIBIT sensor
3-7