Sony GY-8240UWD Maintenance Manual page 167

4. Installing the ME Wire
Install the ME wire in the T drawer assembly as
shown in the figure and fix the lug terminal with
the screw to fasten the wire.
5. Confirming the ME Wire Operation
(1) Confirm that the T-side reel table rotates
when lifting the hook of the tip of the ME
wire upwardly.
Perform the check each at the L cassette
position and S cassette position. (As for the
method of shifting the reel table, refer to
Section 3-1-4.)
(2) Turn the T reel table while pressing the reel
brake assembly in the arrow direction, and
confirm that the T reel table rotates smoothly.
(3) After confirmation, hang the tip of the ME
wire on the wire holder of the bracket (C) to
fasten.
GY-8240UWD
GY-8240FC
3-23. T Drawer Assembly Replacement and Adjustment
Bracket (C)
T drawer assembly
Installing the ME Wire
Treel table assembly
Brake assembly
Confirming the ME Wire Operation
3-23-1. T Drawer Assembly Replacement
PWH3 x 8
Lug terminal
ME wire
ME wire
3-81