Sony GY-8240UWD Maintenance Manual page 318

5-6. LOG Mode
STAT: LOG status
[X Y Z] X.Y = (T:task/F:FEP/B:BEP/H:host/C:other CPU/?:Unknown)
Z = (T:transmission/R:Reception/?:Unknown)
Self
Other party Transmission/reception
. TFT: Transmitted from task to FEP
. TFR: Received by task from FEP
. TBT: Transmitted from task to BEP
. TBR: Received by task from BEP
. TTT: Transmitted from task to task
. FTT: Transmitted from FEP to task
. FTR: Received by FEP from task
. FHT: Transmitted from FEP to host
. FHR: Received by FEP from host
. BTT: Transmitted from BEP to task
. BTR: Received by BEP from task
. CBR: Received by other CPU from BEP
SIZE: Number of data transmitted and received
CMD: Command transmitted and received
TASK: Task number targeted
(However, when communicating with the serial port, the task number is not required)
DATA: Parameter of command transmitted and received
n
The each data of CMD/TASK/DATA is character-converted and displayed if character-convertible (0x20
to 0x7E).
FEP (Front End Processor) is the general term of the I/F process routine nearest to a user. BEP (Back End
Processor) is the general term of the most inner I/F process routine and mainly means the part to process
the interface with FMT-CPU.
5-102
GY-8240UWD
GY-8240FC