Sony GY-8240UWD Maintenance Manual page 112

3-5. W Cleaner Assembly Cleaning Roller Replacement
6. Installing the harness
(1) Fix the harness to the sensor holder position-
ing as shown in the figure.
(2) Connect the harness to the connector CN231
on the HN-268 board.
(3) Fix the harness using a bundling band (or on
equivalent).
Adjustment after Replacement
7. Confirming the Cleaning Solenoid
Operation
Refer to Section 5-4-13.
(CH05: Pinch Roller and Cleaning Roller Sole-
noid Check)
8. Resetting Cleaning-1 (Cleaning Roller
Count-1)
Refer to Section 5-4-8.
3-26
HN-268 board
Bundling band
Connector
(CN231)
Connector
(white)
Harness
Sensor holder
Install the Harness
Cleaning roller
W cleaner assembly
Full erase head
GY-8240UWD
GY-8240FC