1-12. SCSI Control Software scsitool.exe
Operations
Describes the method of operating of this command
1. Preparations
Be sure to execute "SCAN SCSI" before executing this command.
(If already executed, there is not need to execute it again.)
To change the parameter, perform "1. Parameter Settings".
Any type of cassette can be used.
Load the cassette before starting aging.
2. Execution
To execute, click "START" in Fig. 11-3
Operates according to "3. Operating Sequence"
<Fig. 11-3> Screen Selected
1-50
GY-8240UWD
GY-8240FC