Rom Command - Sony GY-8240UWD Maintenance Manual

5-7. ROM Command

5-7. ROM Command
This command is used for displaying the firmware version of each CPU.
Enter "ROM"" from the maintenance terminal. The firmware version of each CPU will be displayed.
n
The ROM command cannot be activated from other mode. To activate the ROM command, terminate the
current mode first.
rom"
***[ROM VERSION DISPLAY]***
[FW Rev] X.XX
[FMT] XX.XX.XX
[SYS] XX.XX.XX
[IF] XX.XX.XX
[SV1] XX.XX.XX
[SV2] XX.XX.XX
[DSP] XX.XX.XX
[ISP] XX.XX.XX
5-106
ROM Command Execution Screen
GY-8240UWD
GY-8240FC