Adjustment after Replacement
12. Adjusting the CTL/TC Head Zenith
Refer to Section 4-2.
13. Adjusting the Tape Running
Refer to Section 4-3.
14. Adjusting the CTL/TC Head Height
Refer to Section 4-5.
15. Adjusting the CTL/TC Head Azimuth
Refer to Section 4-6.
16. Adjusting the CTL/TC Head Position
Refer to Section 4-7.
17. Adjusting the CONFI Head Height
Refer to Section 4-9.
18. Performing the Auto PG Adjustment
Refer to Section 5-9-6.
(3: Auto PG Adjust)
19. Confirming the Tracking
Refer to Section 4-4.
20. Confirming the Tape Running
Refer to Section 4-3.
21. Confirming the Time Code Level in
REV Mode
Refer to Section 4-8.
GY-8240UWD
GY-8240FC
3-8. CTL/TC Head Replacement
3-35