Sony GY-8240UWD Maintenance Manual page 223

help :
quit :
. SETUP
- - - - -
(setup mode)
. ADJ
- - - - -
(adjust mode)
. DEF - - - - -
(machine default set mode) 2 :
. THRU
- - - - -
(Non-IF control mode)
n
For firmware revision 1.21 or higher:
. Adjust mode 51, 53, 54, 55, 56 and 58 are not usable. Refer to Section 5-15 as to adjustment of RF
system. (For firmware revision 1.34 or higher, adjust modes 51, 53, 54, 55, 56, and 58 are not dis-
played.)
. 1 through 5 of adjust mode are usable.
GY-8240UWD
GY-8240FC
Display help
Quit
1 : Setup information set
2 : Setup information display
3 : Default setup information set
help : Display help
quit : Quit
1 : SV check
2 : All motors, tension sensors adj.
3 : Auto PG adjust
4 : ATF check
5 : SAT check
51 : RF PB All Adjust (DTF-2)
53 : RF error rate (DTF-2 PB align)
54 : RF error rate (DTF-2 REC confi)
55 : RF error rate (DTF-2 REC/PB)
56 : RF error rate (DTF-1 PB Align)
58 : RF data save
help : Display help
quit : Quit
1 : NVRAM default set for GY
NVRAM default set for DIR
help : Display help
quit : Quit
1 : FMT CPU
2 : SYS CPU
3 : SV CPU
q : Quit
5-2. List of Menu Configurations
5-7