List Of Error Code And Countermeasure - Sony GY-8240UWD Maintenance Manual

5-13-6. List of Error Code and Countermeasure

When the GY-8240 detects errors during normal operations, it displays error codes on the LCD.
The error code is displayed using a 4-digit major error code and 4-digit minor error code.
The following description applies to both the major error code and minor error code.
? ? ? ?
Detailed error code
Differs according to block
Range detecting error (block)
The top character of the major error code or minor error code indicates the block with the error.
Error code Details
0xxx FM block
1xxx DRV block
2xxx SYS block
3xxx SV block
4xxx IF block
5xxx DSP block
6xxx VRP block or ISP block
When the 3xYZ (x=D) error occurs, refer to "5-13-7. List of Self-Diagnosis Results Codes and Countermeasures".
The error code and details/countermeasures are shown in the following table.
Error Code Details
0001 Attempted to load
0002 Attempted to load
0003 SCSI bus reset was applied during SCSI sequence.
0004 Subcode is damaged.
0005 Data-in-phase was interrupted.
0006 Data-out-phase was interrupted.
0007 Reached end of logical volume.
0008 Block control table is damaged.
0009 Parity error occurred in SCSI bus.
000D Attempted to recover
0014 PCI bus error
0020 Inserted unintended cassette.
0021 During firmware update
0030 Tele-File Read error
0040 Tele-File Write error
Continued to next page
GY-8240UWD
GY-8240FC
(DTF)
a tape which was not unloaded
(DTF) uninitailized tape.
(DTF)
volume not reflected in VSIT.
Remedy
(DTF)
correctly. Perform recovery of tape.
Format tape.
However, DTF-1 cassette and DIR cassette
cannot be formatted in GY-8240WD.
Check upper unit.
Check terminator and cable.
. Clean with cleaning cassette.
. Replace cassette.
Check upper unit.
Check terminator and cable.
Check upper unit.
Check terminator and cable.
Misoperation of upper unit
Replace cassette.
Check terminator and cable.
Misoperation of upper unit
Replace FM-75 board or SCS-28 board.
Replace cassette.
Wait for the firmware update to be
completed.
Replace cassette.
Replace cassette.
5-13. Troubleshooting
5-145