Removal
1. Removing the ME Wire
(1) Release the tip of the ME wire from the wire
holder of the bracket (C).
(2) Remove the screw securing the lug terminal
of the ME wire.
(3) Remove the ME wire from the T drawer
assembly by pulling the wire in the arrow
directions.
2. Removing the T Drawer Assembly
(1) Remove the harness from the connector of
the tape top sensor board.
(2) Release the harness from the hook of the T
drawer assembly.
(3) Remove the two screws to remove the T
drawer assembly.
GY-8240UWD
GY-8240FC
3-23. T Drawer Assembly Replacement and Adjustment
Bracket (C)
T drawer assembly
Removing the ME Wire
PWH3 x 8
Tape top
sensor board
Removing the T Drawer Assembly
3-23-1. T Drawer Assembly Replacement
PWH3 x 8
Lug terminal
Harness
T drawer assembly
Hook
ME wire
3-79