3. Confirming the T Tension Regulator
Assembly Operation
(1) Turn the M gear of the gear box assembly to
let the threading ring thread and unthread.
(2) Confirm that the roller of the T tension
regulator assembly does not come off from
the threading ring and operates normally.
Adjustment after Replacement
4. Performing the Servo Adjustment
Refer to Section 5-9-5.
(All Motors, Tension Sensors Adj)
5. Performing the Tape Running
Refer to Section 4-3.
GY-8240UWD
GY-8240FC
3-22. T Tension Regulator Assembly Replacement
T tension regulator assembly
Roller
Threading ring assembly
T Tension Regulator Assembly Operation
3-77