Reel Brake Release Amount Confirmation - Sony GY-8240UWD Maintenance Manual

3-12. Reel Table Assembly Replacement and Adjustment

3-12-4. Reel Brake Release Amount Confirmation

3-12-4. Reel Brake Release Amount Confirmation
Notes
Be sure to check the release amount of the reel brake when the reel table assembly is
removed or when it is replaced.
Tool
. Wire clearance check gauge set: J-6152-450-A
Check
1. Turning the Power On
S reel table assembly
2. Releasing the Brake
Brake lining
T reel table assembly
Release the brake according to the CH07-S, T
Reel Motor Check. (Refer to Section 5-4-13.)
Brake lining
3. Checking the Brake Release Amount
Check that the brake lining does not touch the
reel table on the supply and take-up sides while a
reel table is rotating. (Specification 1)
If the specification 1 is not satisfied, perform step
3 and higher.
Spec.1: The brake lining doesn't touch a reel table
while reel table rotating.
Reel Brake Release Amount Check
3-49
GY-8240UWD
GY-8240FC