5. Dip SW (IF CPU)
Function: Displays the Dip Switch information of the IF board.
Operation: Enter "12"".
IF_DIAG=>12"
**** [DIP SWITCH DISPLAY] ****
+---------+-----+-----+-----+-----+-----+-----+-----+-----+
| SW Name | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
+---------+-----+-----+-----+-----+-----+-----+-----+-----+
| IF(S2) | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
+---------+-----+-----+-----+-----+-----+-----+-----+-----+
IF_DIAG=>
6. Memory Check (IF CPU)
Function: Checks each memory.
Operation: Enter "21"".
When the check ends normally, "OK" will be displayed.
If errors occur, "ERROR" will be displayed.
(For details, refer to "5-13-7. List of Self-Diagnosis Results Codes and Countermeasures".)
IF_DIAG=>21"
<< IF CPU Memory check >>
IF Memory check ***** OK(Error Code 00000000)
IF_DIAG=>
GY-8240UWD
GY-8240FC
Dip SW (IF CPU) Execution Board
Memory Check (IF CPU) Execution Screen
5-4. DIAG Mode
5-49