Help 2; Sv Check - Sony GY-8240UWD Maintenance Manual

5-9. ADJ Mode

5-9-3. HELP 2

Function: Displays the second menu of the ADJ mode.
Operation: Enter "help2"".
ADJ=>help2"
+===[ Adjustment mode menu ]==============================================+
|
| quit: Quit Tool
|
| << SV >>

| 1: SV check

| 2: All motors, tension sensors adj.
| 3: Auto PG adjust
| 4: ATF check
| 5: SAT check
|
|
+======================================[ Copyright(c) 2000 Sony Corp. ]===+
ADJ=>
5-9-4. SV Check
Function: Automatically executes the servo check. The servo check is executed in the following order;
S reel motor → T reel motor → capstan motor → S tension sensor → T tension sensor → S
reel terminal voltage check → T reel terminal voltage check → drum jitter check
Operation: Enter "1"". This check will take about 8 minutes. To cancel the adjustment, press the
Emergency Eject button. To execute the check after pressing the Emergency Eject button,
turn off and then on the power first.
ADJ=> 1"
SV check ...OK
Checking...
ADJ=>
When the check ends normally, "OK" will be displayed.
If it ends in an error, a message corresponding to the error will be displayed.
For details on messages, refer to "5-9-9. ADJ Mode Error Message".
5-114
help: Display Help Menu
HELP2 Execution Screen
SV Check Execution Screen
|
|
|
|
|
|
|
|
|
|
|
GY-8240UWD
GY-8240FC