Thru Mode; Quit Tool; Fmt Cpu - Sony GY-8240UWD Maintenance Manual

5-11. THRU Mode

5-11. THRU Mode
This mode is used for connecting and controlling the FMT CPU, SYS CPU and SV CPU.
The THRU mode is set by entering "THRU"" from the maintenance terminal.
The message "Select Cpu (1:FMT/2:SYS/3:SV/q:quit)=>" will be displayed as the prompt.
Enter the command number (or command) after this prompt and press ". The command will be execut-
ed.
Entering "q"" after this prompt terminates the THRU mode.
n
The THRU mode cannot be activated from the other mode.
To activate the THRU mode, terminate the current mode first.
THRU"
<< Through Mode >>
Select Cpu (1:FMT/2:SYS/3:SV/q:quit)=>

5-11-1. Quit Tool

Function: Exits the THRU mode and returns to the maintenance mode.
Operation: Enter "q"".

5-11-2. FMT CPU

Function: Connects to the FMT CPU.
Operation: Operation: Enter "1"".
The processing after connection follows the maintenance specifications of the FMT CPU.
Entering "quit"" before setting the FMT CPU maintenance menu returns to the prompt display screen
of the THRU mode.
Select Cpu (1:FMT/2:SYS/3:SV/q:quit)=> 1"
5-128
THRU Mode Execution Screen
FMT CPU Execution Screen
GY-8240UWD
GY-8240FC