Confirmation
4. Turn the Power On
5. Set the unit into the line mode
6. Play Back the Alignment Tape
Play back the YR2-1A. (FWD mode)
7. Check the Time Code Output Level
Check the time code output level A.
8. Put the Unit into VAR _ _ _ _ _ 1 time normal
speed Mode
9. Check the Time Code Output Level
Check that the time code output level B satisfies
specification 1.
If the specification 1 is not satisfied, perform
steps 10 and later.
GY-8240UWD
GY-8240FC
* Alignment tape: YR2-1A
FWD
TC
ANA
Spec.1: B x 100 > 70%
Time Code Level Check in REV Mode
4-8. Time Code Level Adjustment in Rev Mode
VAR_1
A
A
B
4-29