Sony GY-8240UWD Maintenance Manual page 51

4) OPTION ... Function for Setting GY Com-
mand Parameter
Data which need to be set by the command for
GY can be set by command.
♦Refer to Fig. 8.
How to use : Click the item to be set using the
mouse. The parameter setting
dialog box will be displayed for
each command. Input the values,
and click the "OK" button.
(Use as a set with the "3)
GY_CMD".)
[Popup Menu]
. REQ/INQ CMD SET
. READ CMD SET
. WRITE CMD SET
. WRITE FM CMD SET
. SPACE CMD SET
. MDSEL CMD SET
. RSV UNIT CMD SET
. RLS UNIT CMD SET
. COPY CMD SET
. MDSNS CMD SET
. LD/UNLD CMD SET
. PREVENT CMD SET
. LOCATE CMD SET
. READ POS CMD SET
. WRITE BUF CMD SET
. READ BUF CMD SET
. LOG SELECT CMD SET
. LOG SENSE CMD SET
. RD VOL LBL CMD SET
. WRT VOL LBL CMD SET — Setting of parameters of Write Volume Label command
. MT/UNMT CMD SET
. EJECT CMD SET
GY-8240UWD
GY-8240FC
— Setting of parameters of Request Sense command and Inquiry command
— Setting of parameters of Read command
— Setting of parameters of Write command
— Setting of parameters of Write Filemarks command
— Setting of parameters of Space command
— Setting of parameters of Mode Select command
— Setting of parameters of Reserve Unit command
— Setting of parameters of Release Unit command
— Setting of parameters of Copy command
— Setting of parameters of Mode Sense command
— Setting of parameters of Load/Unload command
— Setting of parameters of Prevent/Allow command
— Setting of parameters of Locate command
— Setting of parameters of Read Position command
— Setting of parameters of Write Buffer command
— Setting of parameters of Read Buffer command
— Setting of parameters of Log Select command
— Setting of parameters of Log Sense command
— Setting of parameters of Read Volume Label command
— Setting of parameters of Mount/Unmount command
— Setting of parameters of Eject command
1-12. SCSI Control Software scsitool.exe
<Fig. 8-1> Setup Menu of GY Single Commands
1-41