Sony GY-8240UWD Maintenance Manual page 119

Removal
1. Removing the CL Guide Rail
Remove the CL guide rail.
(Refer to step 5 in Section 3-20.)
2. Disconnecting the Harness
Disconnect a the Harness on the CTL/TC head
assembly.
3. Removing the CONFI Head Assembly
Remove the CONFI head assembly.
Refer to step 3 in Section 3-7.
4. Removing the CONFI Head
Positioning Plate
(1) Remove the compression coil spring.
(2) Remove the screw to remove the CONFI
head positioning plate and CONFI head
bracket.
5. Removing the CTL/TC Head Assembly
Remove the screw, then remove the CTL/TC
head assembly from the MD base assembly.
n
Be careful not to touch the drum (especially
rotary heads). Also, take care not to damage the
peripheral tape guides.
GY-8240UWD
GY-8240FC
Compression coil spring
CTL/TC head assembly
PSW3 x 8
Remove the CTL/TC Head Assembly
3-8. CTL/TC Head Replacement
PSW3 x 8
CONFI head
bracket
CONFI head
bracket (2)
Harness
3-33