Vendor Information Set - Sony GY-8240UWD Maintenance Manual

5-3-3. Vendor Information Set

Function: Sets vendor information.
Operation: Enter "1"".
The entry of a value will be prompted at each item. Enter after "=>" for each item.
Press " after entering each item to execute.
Pressing only " does not change the current value.
(The current value is displayed in the [ ].)
Vendor information which can be set are the following six items.
. Vendor ID (within 8 characters)
. Vendor name (within 8 characters)
. Vendor ROM version (within 4 characters)
. Model name (within 16 characters)
. Interface information (select one)
. Series information (select one)
After setting all the above items, a message to confirm whether to set the value entered will be displayed.
Entering "Y"" writes the value in the memory area for storage (NVRAM).
Entering "N"" does not change the setting.
CUSTOM=>1"
*****[ VENDOR INFORMATION SET ]*************************
Vendor ID (0-99999999)
Vendor name (8 characters)
Vendor ROM version (4 characters)
Machine name (16 characters)
Interface (0:SCSI-WD/1:SCSI-WS/2:SCSI-UWD/3:SCSI-LVD/8:Fibre channel/12:VRP)
Series (0:GY-10/1:GY-2120/2:GY-8240/3:DIR-240/4:DIR-120/5:EVALUATOR)
Are you sure? (Y:yes/N:no)=>Y"
CUSTOM=>
Default value of each item
. Vender ID: 0
. Vender name: SONY
. Vender ROM version: 1.00
. Machine name:
GY-8240
. Interface:
2
. Series:
2
GY-8240UWD
GY-8240FC
[0]
[SONY ]
[1.00]
[GY-8240
[2]
[2]
Vendor Information Setting Screen
=>1000"
=>"
=>1.30"
] =>GY-8240"
=>12"
=>3"
5-3. CUSTOM Mode
5-9