Sony GY-8240UWD Maintenance Manual page 46

1-12. SCSI Control Software scsitool.exe
[Popup Menu]
. SCAN SCSI :
Indicates the SCSI ID
currently connected.
By executing this menu, the SCSI ID connected
to this tool will be acknowledged. If a device is
connected, the name of the vendor and model
will be displayed at the ID No. connected.
♦Refer to Fig. 3.
. NOW DEVICE :
Displays the name of the
vendor and model of the
device acknowledged by
the host currently for each
GY/DMS.
♦Refer to Fig. 4.
. NEXT DMS :
If several DMSs are
connected, the direct target
will be the DMS connected
to the DMS currently made
the direct target by the
host.
. NEXT GY :
If several GYs are connect-
ed, the direct target will be
the GY currently made the
direct target by the host.
. RESET DEVICE : Resets the device.
(* Not usable with this
TOOL.)
. ADAPTER #0 :
Set the adapter number to
"0".
. ADAPTER #1 :
Set the adapter number to
"1".
. TARGET #0 to #7 : Set the SCSI ID of the
target to "0" to "7".
1-36
<Fig. 3> Screen When "SCAN SCSI" of the Popup Menu is Executed
(GY-8240 is connected to ID = 5)
<Fig. 4> Screen When "NOW DEVICE" of the Popup Menu is Executed
(DMS is not connected, and only GY-8240 is connected)
GY-8240UWD
GY-8240FC