Table of Contents
Advertisement
5-4. DIAG Mode
f.
R4-Servo Locks Status Display
Function: Displays servo lock information.
This allows the servo lock state to be checked in the line mode, etc.
Operation:
(1) Enter "R4"". The following is displayed.
SV1_DIAG=>R4"
SV1_DIAG=>
[At-][Cap&Drum-][Cap-][Drum-][CtlValid*][AtValid*]
[At-]:
The display changes from [At-] to [At*] when auto tracking is locked.
[Cap&Drum-]: The display changes from [Cap&Drum-] to [Cap&Drum*] when the capstan and drum
are locked.
[Cap-]:
The display changes from [Cap-] to [Cap*] when the capstan is locked.
[Drum-]:
The display changes from [Drum-] to [Drum*] when the drum is locked.
[CtlValid*]:
The display changes from [CtlValid-] to [CtlValid*] when CTL is detected normally.
[AtValid*]:
The display changes from [AtValid-] to [AtValid*] when the ATF signal is detected
normally.
5-30
GY-8240UWD
GY-8240FC
- Quick Links:
- Scsi Control Software Scsitool.exe
Hide quick links:
Advertisement
Table of Contents
