Sony GY-8240UWD Maintenance Manual page 340

5-10. SETUP Mode
6. Unload mode
Function: Sets the unload mode.
Setting:
0: Normal unload mode
1: Fast unload mode
7. Auto load mode
Function: Sets the load mode.
Setting: 0: Manual load mode
1: Auto load mode
8. Fast unload location
Function: Sets the tape position after unloading in the fast unload mode.
Setting: 0: Normal
1: Tape beginning
9. Auto format mode
Function: Sets the format mode.
Setting:
0: Manual format mode
1: Auto format mode
10. On the halfway
Function: Sets on-the-halfway
Setting:
0: Invalid
1: Valid
11. Compression mode
Function: Sets the compression mode.
Setting: 0: Setting with the SCSI command is valid
1: Compression mode
2: Normal mode
12. File mark flush mode
Function: Sets the file mark flush mode.
Setting:
0: No file mark flush mode
1: File mark flush mode
13. Recover TYPE
Function: Sets the type of recover algorithm.
0: Uses the algorithm which has been used since GY-10/2120.
1: Uses the improved algorithm which is enhanced in the recovering ability.
2: In addition to the type 1 recover, reconfirms the part which could not read. When the
recover results in half recover, the error is reported.
Setting: 0: Recovered with the type 0 algorithm
1: Recovered with the type 1 algorithm
2: Recovered with the type 2 algorithm
14. Fast read mode
Function: It is the mode whether function of the fast read mode should be of ON or OFF.
Setting:
0: Fast read function is OFF.
1: Fast read function is ON.
5-124
GY-8240UWD
GY-8240FC