Equipments Required And Connection - Sony GY-8240UWD Maintenance Manual

5-1. Outline

5-1-1. Equipments Required and Connection

The following equipments are required for using the maintenance mode. Connect them as shown in the
figure below.
1. for RS-232C port
. PC (installed with Microsoft Windows 95/98/NT)
*1
. RS-232C cable
. Terminal emulation software
This software is for performing the emulation of the terminal using the RS-232C port (COM port) of
the PC.
The freeware "Tera Term (Pro)" is recommended.
*2
PC
AC
2. for Network port
n
Never connect the GY-8240 network port to a general LAN unless authorized by the network administra-
tor of the LAN.
If the GY-8240 is already connected to the network in a system or LAN, check the network configuration
etc. with the network administrator beforehand.
Use of the network port for maintenance without checking may affect the system and LAN.
. PC (installed with Microsoft Windows 95/98/NT)
. Network cable *3
. Terminal software *4
Use a software which allows connection by Telnet by TCP/IP using the network port (10BASE-T
Ethernet port) of the PC and to perform terminal emulation equivalent to VT100.
The freeware "Tera Term (Pro)" is recommended.
PC/
work station
AC
Or
PC/
work station
AC
5-2
*2
(compatible with DEC VT100)
RS-232C cable
RS-232C
port
AC IN
AC
Network cable (Crossed)
Network port
*4
AC
HUB
Network port
Network cable (Straight)
OPTION-1
GY-8240
OPTION-3
GY-8240
AC IN
To other GY-8240
OPTION-3
GY-8240
AC
GY-8240UWD
GY-8240FC