5-12. DEF Mode
5-12-4. GY-FC
Function: Set value of the NVRAM to the default of GY-FC
Operation: Enter "2 "".
Input the serial number following up the Prompt [Serial number? =>]
All default values will be displayed, and at the end, a confirmation message will be displayed. To set the
default value, enter "y"". To cancel the setting, enter "n"".
n
Settings are effective after the GY-8240 is restarted. After setting this mode, be sure to turn off and then
on the power.
FC port name/FC node name will be set automatically by the serial number.
5-133
GY-8240UWD
GY-8240FC