Setting The Recording Mode; Using The Sbm (Super Bit Mapping) Function - Sony DTC-ZE700 Operating Instructions Manual

Setting the Recording Mode

You can select either of two recording modes—
standard or long—in the following cases:
• When recording an analog input signal with the
INPUT switch set to ANALOG
• When recording a digital input signal with a
sampling frequency of 32 kHz with the INPUT
switch set to OPTICAL or COAXIAL
MODE
RESET
g TIMER START ID MARGIN
REC OFF PLAY AUTO RENUMBER REHEARSAL WRITE ERASE RESET
POWER
Set REC MODE to select the recording mode.
The following table shows the selectable recording
modes and corresponding REC MODE position and
sampling frequency for various input signals.
Input signal REC MODE
position
Analog STANDARD
(48 kHz)
STANDARD
(44.1 kHz)
LONG
Digital (32 kHz) STANDARD
(48 kHz)
STANDARD
(44.1 kHz)
LONG
Digital (44.1 kHz) STANDARD
(48 kHz)
STANDARD
(44.1 kHz)
LONG
Digital (48 kHz) STANDARD
(48 kHz)
STANDARD
(44.1 kHz)
LONG
The recording time in long-play mode (the REC MODE
switch set to LONG) is twice as long as standard-play
mode.
z
Note
Do not change the INPUT or REC MODE setting while
recording. This may cause an error in the "PGM TIME"
(playing time of the track) display.
REC LEVEL L R
INPUT REC MODE SBM
5
STANDARD ON 4 6
OPEN/CLOSE
Using the SBM (Super Bit
ANALOG 48 kHz
§ 3 7
OPTICAL 44.1 kHz
COAXIAL LONG
2 8
OFF
1 9
AMS REC MUTE
≠ ± 0 ) R
0 10
PHONES PHONE LEVEL
p · P r Mapping) Function
REC
0 10
You can use the SBM function to record on analog
REC MODE
input signal only when the INPUT switch is set to
ANALOG and the REC MODE switch to STANDARD
(either 48 kHz or 44.1 kHz). For details on the SBM
function, see "SBM (Super Bit Mapping) Function" on
page 21.
Recording mode
Standard play
(48 kHz)
Standard play
(44.1 kHz)
Set SBM to ON.
Long play (32 kHz)
"SBM" appears in the display during recording using
the SBM function.
Standard play
(32 kHz)
To turn the SBM function off
Set SBM to OFF.
Long play (32 kHz)
Standard play
(44.1 kHz)
(Standard play
only)
Standard play
(48 kHz)
(Standard play
only)
Recording Operations
The counter in long-play mode
The displayed tape running time, absolute time and
remaining time on the tape are for standard-play
mode. Double the time to obtain the corresponding
times for long-play mode.
MODE
RESET
g TIMER START ID MARGIN
REC OFF PLAY AUTO RENUMBER REHEARSAL WRITE ERASE RESET
POWER
REC LEVEL L R
INPUT REC MODE SBM
5
OPEN/CLOSE STANDARD ON 4 6
ANALOG 48 kHz
3 7
§
OPTICAL 44.1 kHz
COAXIAL LONG
2 8
OFF
1 9
AMS REC MUTE
≠ ± 0 ) R 0 10
PHONES PHONE LEVEL
p · P r
REC
0 10
SBM
11 EN