Input Data Format; Data Formats - Fujitsu MB86R02 Jade-D Hardware Manual

MB86R02 'Jade-D' Hardware Manual V1.64

23.5 Data Formats

23.5.1.1

Input Data Format

The following table describes the supported data formats. These are compliant with the data
formats used in Fujitsu's MB87P2020A 'Jasmine' IC.
Format
Mode
[bit per pixel]
1bpp Compressed
uncompressed
2bpp Compressed
uncompressed
4bpp Compressed
uncompressed
8bpp Compressed
uncompressed
1
16bpp Compressed
uncompressed
24bpp Compressed
uncompressed
32bpp Compressed
uncompressed
The following applies to all modes:
Compressed data "<1NNN NNNN> <pixel>" is decompressed to (<NNN NNNN> + 1 ) pixels.
1
May be used for e.g. RGB555 or RGB565
Command Byte Color Bytes/Bits
<MSB LSB> <MSB
<1NNN NNNN> Color bit <C> (bit- aligned)
<0NNN NNNN> (NNN_NNNN+1) bits with color data <C...C>
(bit-aligned)
<1NNN NNNN> Color bits<CC> (bit- aligned)
<0NNN NNNN>
(NNN_NNNN+1)
<CC...CC> (bit-aligned)
<1NNN NNNN> Color bits<CCCC> (bit- aligned)
<0NNN NNNN> (NNN_NNNN+1)
<CCCC...CCCC> (bit-aligned)
<1NNN NNNN> 1 color byte <CCCC CCCC>
<0NNN NNNN> (NNN_NNNN +1) bytes with color
data <CCCC CCCC>
<1NNN NNNN> 2 bytes color data (<CCCC
CCCC>,<CCCC CCCC>)
<0NNN NNNN> (NNN_NNNN +1)*2 bytes with color
data (<CCCC CCCC>,<CCCC
CCCC>)
<1NNN NNNN> 3 bytes color data (<CCCC
CCCC>,<CCCC CCCC>, <CCCC
CCCC>)
<0NNN NNNN> (NNN_NNNN +1)*3 bytes with color
data (<CCCC CCCC>,<CCCC
CCCC>, <CCCC CCCC>)
<1NNN NNNN> 4 bytes color data (<CCCC
CCCC>,<CCCC CCCC>, <CCCC
CCCC>,<CCCC CCCC>)
<0NNN NNNN> (NNN_NNNN +1)*4 bytes with color
data (<CCCC CCCC>,<CCCC
CCCC>, <CCCC CCCC>,<CCCC
CCCC>)
Table 1
LSB>
x2 bits with color data
x4 bits with color data
23-3