Table of Contents
Advertisement
MB86R02 'Jade-D' Hardware Manual V1.64
6.5 Control Flow
6.5.1 Operation
The configuration parameters of the SSCG unit can be programmed as shown below:
Sscg_period = 35KHz
Sscg_period_period= 10%
Centre spread
Sscg degree = +/-1.5%
No frequency offset
disable interrupt
Desired
Indiviual setting?
YES
666MHz PLL clock
Refer to
Table 1,Table5,
Table6, Table7
Start SSCG by setting
SSCG_ENABLE =1
NO
Change
Configuration?
YES
SSCG_ENABLE = 0
Figure 6-7 SSCG programming flow
.
reset
Default setting
NO
SSCG runs
6-11
Advertisement
Table of Contents
