Fujitsu MB86R02 Jade-D Hardware Manual page 426

MB86R02 'Jade-D' Hardware Manual V1.64
Enables simultaneous display of the L2 and L3 layers. These layers correspond to the M
layer for previous products.
0:
1:
L2E (L2 layer Enable) ------ DCM1
Enables L2 layer display
0:
1:
Bit 19 L45E (L4 & L5 layer Enable) ------ DCM0
Enables simultaneous display of the L4 and L5 layers. These layers correspond to the B
layer for previous products.
0:
1:
L3E (L3 layer Enable)) ------ DCM1
Enables L3 layer display
0:
1:
Bit 20 L4E (L4 layer Enable)
Enables L4 layer display
0:
1:
Bit 21 L5E (L5 layer Enable)
Enables L5 layer display
0:
1:
Bit 30 STOP
(TBD)
Bit 31 DEN (Display Enable)
Enables display
0:
1:
18-68
Does not display L2 and L3 layer
Displays L2 and L3 layer
Does not display L2 layer
Displays L2 layer
Does not display L4 and L5 layer
Displays L4 and L5 layer
Does not display L3 layer
Displays L3 layer
Does not display L4 layer
Displays L4 layer
Does not display L5 layer
Displays L5 layer
Does not output display signal
Outputs display signal