MB86R02 'Jade-D' Hardware Manual V1.64
22.5 Processing Mode
22.5.1 Processing Flow
Figure 22-2 TCON Processing Flow
22.5.2 Processing Algorithm
22.5.2.1
Operation Modes
The TCON module is either active or in bypass mode (Register RBM_DIR_CTRL.bypass). In bypass
mode, the RGB data from the RGB source is transmitted unchanged through the RBM submodule.
Additional 3 timing signals (HSYNC, VSYNC, DE) from the frame generator are bypassed to the TSIG
output signals TSIG[0:2]. The RGB data and the 3 timing signals have the same latency.
22-29