Table of Contents
Advertisement
MB86R02 'Jade-D' Hardware Manual V1.64
L2BLD (L2 Blend)
Register
DisplayBaseAddress + 0x18C
address
Bit number
31 30 29 28 ----- 20 19 18 17 16
Bit field name
R/W
Initial value
This register specifies the blend parameters for the L2 layer.
Bit 7 to 0
L2BR (L2 layer Blend Ratio)
Sets the blend ratio. Basically, the blend ratio is setting value/256.
Bit 13
L2BP (L2 layer Blend Plane)
Specifies that the L5 layer is the blend plane.
0
Value of L2BR used as blend ratio
1
Pixel of L5 layer used as blend ratio
Bit 14
L2BI (L2 layer Blend Increment)
Selects whether or not 1/256 is added when the blend ratio is not "0".
0
Blend ratio calculated as is
1/256 added when blend ratio ≠ 0
1
Bit 15
L2BS (L2 layer Blend Select)
Selects the blend calculation expression.
Upper image × Blend ratio + Lower image × (1 – Blend ratio)
0
Upper image × (1 – Blend ratio) + Lower image × Blend ratio
1
Bit 16
L2BE (L2 layer Blend Enable)
This bit enables blending.
0
Overlay via transparent color
1
Overlay via blending
Before blending, the blend mode must be specified using L2BE and alpha must also be enabled for
L2 layer display data. For direct color, alpha is specified using the MSB of data; for indirect color,
alpha is specified using the MSB of palette data.
Reserved
L2BE L2BS L2BI L2BP
R0
RW
RW
0
0
15
14
13 12 11 10 9 8 7 6 5 4 3 2 1 0
Reserved
RW
RW
RW0
X
X
X
0
L2BR
RW
X
18-105
Advertisement
Table of Contents
