Fujitsu MB86R02 Jade-D Hardware Manual page 308

MB86R02 'Jade-D' Hardware Manual V1.64
The HOSTIF module detects the first '0' of the HOST XCS and stores the data bytes of the
specified length. Each byte can be sent using continuous and the non-continuous transmission.
The HOSTIF module allows the use of the following three kinds of phase relationships.
16.4.2.3.1. Non-continuous data bytes with non-continuous HOST XCS
HOST SCK
HOST XCS
HRESET
or
HOST DI
Reset
Fram e
HOST DO
Figure 16-11 Non-continuous data bytes with non-continuous HOST XCS
16.4.2.3.2. Non-continuous data bytes with continuous HOST XCS
HOST SCK
HOST XCS
HRESET
or
HOST DI
Reset
Frame
HOST DO
Figure 16-12 Non-continuous data bytes with continuous HOST XCS
16.4.2.3.3. Continuous data bytes with continuous HOST XCS
HOST SCK
HOST XCS
HRESET
or
HOST DI
Reset
Frame
HOST DO
First byte (CMD byte) second byte (ABL#0 byte)
First byte (CMD byte) second byte (ABL#0 byte)
First byte (CMD byte) second byte (ABL#0 byte) third byte (ABL#1 byte) Last byte (CMD byte)
Last byte (ST/DB byte)
Last byte (CMD byte)
Last byte (ST/DB byte)
Last byte (CMD byte)
Last byte (ST/DB byte)
16-9