Traverse Function - Omron CS1W-MC221 - 02-2008 Operation Manual

Traverse Function

6-7 Traverse Function
Overview
G Code Specifications
Example Application
336
2. An external signal for interrupt feeding can be input via general inputs1 to
4 of the MC Unit.
Input number
General input 1 For X-axis interrupt feeding
General input 2 For Y-axis interrupt feeding
General input 3 ---
General input 4 ---
Mode: Automatic; Method: G language (G32)
The traverse function is a special G-language command (G32) that is pro-
vided for winding machine operations. For details on using the traverse com-
mand with the G language, refer to 7-3-15 G32: TRAVERSE.
The setting for 100 windings per layer is 36000 because one winding is equiv-
alent to 360 .
In this example, the wire is wound around a spool on a winding machine. The
spool is turned in a fixed direction and the traverse axis is operated according
to the settings for the traverse function.
MC221
For X-axis interrupt feeding
For Y-axis interrupt feeding
For Z-axis interrupt feeding
For U-axis interrupt feeding
Number of winding layers
Speed of rotating axis
Width
Number of windings per layer: 100
Spool rotation
Traverse axis
Section 6-7
MC421