Iowr And Iord Specifications; Iowr: Intelligent I/O Write - Omron CS1W-MC221 - 02-2008 Operation Manual

IOWR and IORD Specifications

!Caution Do not save data to flash memory during operation or while a motor is being
4-2 IOWR and IORD Specifications
4-2-1

IOWR: INTELLIGENT I/O WRITE

driven. Doing so can result in unexpected operation.
C: Control code, S: First source word, D: Destination unit number and total
number of words written
Oper-
and
C
MC Unit address (Hex)
Specifies the first address in the MC Unit to which data will be written.
S
First source word
Specifies the first word in the CPU Unit from which data is to be
transferred. The following areas can be specified as the source start
word. Refer to the SYSMAC CS Series Programmable Controller
Operation Manual (W399) for details on each address.
Area
CIO Area
Work Area
Holding Bit Area
Auxiliary Area
Timer Area
Counter Area
DM Area
EM Area
DM Area with bank
designation
Indirect DM/EM address,
binary
Indirect DM/EM address, BCD *D00000 to 32767
IOWR @IOWR
C
S
D
Description
0000 to 6143
W000 to 511
H000 to 511
A000 to 959
T0000 to 4095
C0000 to 4095
D00000 to 32767
E00000 to 32767
En_00000 to 32767 (n=0 to C)
@D00000 to 32767
@E00000 to 32767
@En_00000 to 32767 (n=0 to C)
*E00000 to 32767
*En_00000 to 32767 (n=0 to C)
Section 4-2
C
S
D
Range
209