Function Specifications - Omron NX Series Manual

Unit name
Model
Installation orientation and
restrictions
Protective functions

Function Specifications

Refer to your local OMRON website for function specifications of the Communication Control Unit and Safety Control Unit.
NX- SOH200
Installation orientation:
• Connected to a CPU Unit or a Communication Control Unit
Possible in the upright installation orientation.
• Connected to a Communications Coupler Unit
6 possible orientations
Restrictions: For upright installation, the ambient temperature
is restricted as shown below depending on the
total Unit load current.
4
3
2
1
0
0 10 20 30
Ambient temperature [°C]
For all installation orientations other than upright
installation, the ambient temperature is restricted as
shown below according to the total Unit load current.
4
3
2
1
0
0 10 20 30
Ambient temperature [°C]
Overvoltage protection circuit and short detection (test outputs)
Safety Output Unit
NX- SOD400
Installation orientation:
• Connected to a CPU Unit or a Communication Control Unit
Possible in the upright installation orientation.
• Connected to a Communications Coupler Unit
6 possible orientations.
Restrictions: None
2.5 A
40 50 55
40 50
NX-CSG/SL5/SI/SO
12