Omron CS1W-MC221 - 02-2008 Operation Manual page 172

Connecting Peripheral Devices
1,2,3...
Removing the Cable
1. Remove the connector cover.
Open the cover using a
Cover
small-size flat-blade
screw.
2. Plug the Connecting Cable into the connector.
3. Plug the Connecting Cable into the MC Unit connector marked "T.B."
Using your fingers, press in and hold the clamps on both sides of the connec-
tor and pull out the connector.
Unlocking
clamps
Attach the removed cover to
the rear surface not to lose it.
Cover attached
Align the connector and push it in until
you hear a click.
Section 2-7
145