Wiring
DRV X-Y Pin Allocation
DRV X-Y connector
DRV X-Y connector
DRV Z-U
connector
Attaching Connectors
The following diagram shows the pin allocation for the DRV X-Y connector.
Pins 6, 7, 24, and 25 are not used.
Connector pin
arrangement
Connector pin
arrangement
Attach the connectors as follows:
• Use the connectors (snap-on type) provided with the Unit.
• Use the anti-electrostatic screws provided with the Unit. There are eight
screws for the CS1W-MC421 and four for the CS1W-MC221.
Anti-electrostatic
screws
---
---
---
---
Section 2-3
---
---
---
---
113