Omron CS1W-MC221 - 02-2008 Operation Manual page 664

Origin Search Patterns
Reverse-mode Origin Search 9
This origin search is performed with an origin proximity signal, and both phase-Z detection direction and initial
origin search direction set to CW with no phase-Z signal input.
Limit signal input
Origin proximity
signal input
Phase-Z signal
Speed
Note Operation will vary depending on the setting of the limit signal input.
Appendix F
Error
(Origin proximity and over-
travel simultaneously ON.)
(See note.)
Error
(Origin proximity and over-
travel simultaneously ON.)
(See note.)
Error
(Origin proximity and over-
travel simultaneously ON.)
(See note.)
Error
(Origin proximity and over-
travel simultaneously ON.)
(See note.)
Error
(Origin proximity and over-
travel simultaneously ON.)
Error
(Origin proximity and over-
travel simultaneously ON.)
(See note.)
637