Omron CS1W-MC221 - 02-2008 Operation Manual page 667

Origin Search Patterns
Reverse-mode Origin Search 12
This origin search is performed with an origin proximity signal input, and both phase-Z detection direction and
initial origin search direction set to CW.
Limit signal input
Origin proximity
signal input
Phase-Z signal
Speed
Note Operation will vary depending on the setting of the limit signal input.
640
Error
(No origin proximity signal.)
(See note.)
Error
(No origin proximity signal.)
(See note.)
Error
(No origin proximity signal.)
(See note.)
Error
(No origin proximity signal.)
(See note.)
(See note .)
Appendix F