Other Functions - Omron CS1W-MC221 - 02-2008 Operation Manual

Basic Operations
Unlimited Feeding
1-3-2

Other Functions

Origin Search
Jogging
Error Counter Reset
Present Position Preset
Teaching
Zones
Override (Real Time
Speed Change)
Backlash Correction
Electronic Gears
10
Traversing
The following illustration shows the action of the winder (traverse function) for
a winding machine.
This function executes unlimited feeding for the specified axis.
Establishes the origin for a specified axis.
Starts and stops positioning at a specified speed along a specified axis.
Forcibly resets the error counter to zero and stops axis operation after a
deceleration command.
Changes the present position according to specified position data.
Obtains the present position to create position data.
A Zone Flag turns ON when the present position is within a preset range.
Changes the speed during PTP, linear interpolation, or circular interpolation
operations.
Compensates for inaccurate meshing in the mechanical system.
Sets a pulse ratio for the input pulses with MPG/sync encoders.
Winder
Traverse axis
Section 1-3