Omron CS1W-MC221 - 02-2008 Operation Manual page 533

System Configuration and Wiring
6) Adding MC Units/Setting and Saving System Parameters
Adding an MC Unit and Saving System Parameters
1,2,3...
506
Note A simple explanation of the operation procedure is given below. For details,
refer to the CX-Motion Online Help.
1. In the project workspace, click the icon of the PLC that was added in 5)
Creating Projects/Adding PLCs (CPU Units), and then select Edit/Add
MC. The MC Unit Dialog Box will be displayed.
2. Input the desired MC Unit name.
3. Click the Down Arrow at the right of the MC Type Field and select CS1W-
MC221 from the menu.
4. Set the unit number under Communications Environment Settings to 0
(unit number 0).
5. Click OK.
6. In this operation, new parameters are to be created, so click No. The Pa-
rameter File Save Type Dialog Box will be displayed.
7. Input the file name and click Save. The system parameters will be saved,
and registered in the project.
Section 11-2