Connecting A Personal Computer To The Cpu Unit - Omron CS1W-MC221 - 02-2008 Operation Manual

Connecting Peripheral Devices
2-7-1

Connecting a Personal Computer to the CPU Unit

Connecting an IBM PC/AT or Compatible Computer
Connecting to peripheral port
IBM PC/AT or
compatible
computer
9-pin connector
CS1W-CN118 (0.1 m)
CS1W-CN226 (2.0 m)
CS1W-CN626 (6.0 m)
CX-Motion Connecting Cables (for IBM PC/AT or Compatible)
Unit Port on Unit
CPU Unit Peripheral
RS-232C
(9-pin D-sub
female)
Serial Communi- RS-232C
cations Board/ (9-pin D-sub
Unit female)
!Caution Before connecting to an RS-232C port, touch a grounded metal object to dis-
Unit Port on Unit
CPU Unit Peripheral
port
Connect the computer to the CPU Unit's peripheral port or built-in RS-232C
port. For details, refer to the SYSMAC CS Series Programmable Controller
Operation Manual (W399).
Note It is also possible to connect the computer to the port for the Serial Communi-
cations Board/Unit if the port is set to Host Link Mode.
Connecting to RS-232C port
CPU Unit pe-
ripheral port
Port on
computer communications
mode (network)
9-pin D-sub Peripheral bus or
male Host Link
Host Link
charge static electricity from your body. (Although the XW2Z-@00S-CV cables
are equipped with static-resistant connector hoods (XM2S-0911-E), you must
still discharge static electricity before touching the connectors.)
The following cables can be used to connect an RS-232C cable to the periph-
eral port.
Port on
computer communications
mode (network)
9-pin D-sub Peripheral bus or
male Host Link
Host Link
IBM PC/AT or
compatible
computer
9-pin connector
9-pin connector
XW2Z-200S-CV (2.0 m)
XW2Z-500S-CV (5.0 m)
Serial Model numbers
CS1W-CN226
CS1W-CN626
XW2Z-200S-CV
XW2Z-500S-CV
XW2Z-200S-CV
XW2Z-500S-CV
Serial Model numbers
CS1W-CN118 +
XW2Z-200S-CV
or
XW2Z-500S-CV
CS1W-CN118 +
XW2Z-200S-C
or
XW2Z-500S-C
Section 2-7
CPU Unit built-in RS-232C port or
Serial Communications Board/
Unit port
Length Remarks
2.0 m ---
6.0 m
2.0 m ESD (static
electricity)-resis-
5.0 m
tant connectors
used.
2.0 m
5.0 m
Length Remarks
0.1 m + ESD (static
(2 or 5 m) electricity)-
resistant
connectors used
for
XW2Z-@00S-CV.
---
143